How To Fix Snow Throwing Inconsistency In Snow Blower’s

How To Fix Snow Throwing Inconsistency   In Snow Blower’s

Dealing with inconsistent snow throwing in your snow blower can be frustrating, especially when you need it most. Whether it's weak or uneven snow discharge, these issues can slow you down and affect your efficiency. The good news is, most of these problems are easy to fix with a little maintenance and attention. In this article, we’ll walk you through the most common causes of snow throwing inconsistencies and provide simple, effective solutions to restore your snow blower’s performance. Keep reading to get back to hassle-free snow clearing!

Common Snow Throwing Inconsistencies & Their Fixes

In case you experience an inconsistent snow throwing in your snow blower, it is advisable to seek the services of a professional to rectify the problem to avoid making it worse. Whether it is worn paddles, a blocked chute or damaged belts, the right snow blower fix will guarantee that your equipment is running efficiently and effectively to provide uninterrupted snow clearing.

1. Worn or Damaged Paddles

Another factor that leads to irregular snow throwing is the blunting or damage of the paddles. The rubber paddles are used for scooping and throwing the snow and they are prone to wear and tear due to the harsh conditions that they are exposed to in the course of their use.

How to Fix:

• Check the Paddles: Ensure that the paddles are not worn out by checking for thinning or cracking on the surface.

• Replace Worn Paddles: If the paddles are worn out, then it is advisable to have them replaced with new ones. It is always advisable to use paddles that are compatible with the snow blower in order to get the best results.

2. Clogged Chute or Auger

A clogged chute or auger can greatly impact the snow throwing pattern of the snow blower. Snow and ice may accumulate in the chute and hinder the flow of snow and in some cases, the blower may not throw snow at all.

How to Fix:

• Amongst its features: Clear the chute and auger after use, with the presence of snow or ice on the chute.

• Non-stick Lubricant: Before using the chute, it is advisable to spray a non-stick substance inside the chute to avoid sticking of snow and formation of blockage.

3. Improper Auger Height

The height of the auger also affects how well the snow is picked up and thrown by the machine depending on the height at which the auger is set. If the auger is set too high, it will not pick up enough snow and if placed too low it will drag the snow blower across the ground too roughly.

How to Fix:

• Adjust the Auger Height: Consult the owner’s manual for instructions on how to adjust the auger height. Make sure that the height of the auger is correct to allow for efficient picking of the snow and throwing it out.

4. Damaged or Worn Belts

The belts in your snow blower are responsible for turning the auger and impeller that throws the snow. If the belts are worn, loose, or damaged, they can cause the auger and impeller to run erratically and this will affect the throwing of the snow.

How to Fix:

• Check the Belts: The belts should be inspected for signs of wear, fraying or damage.

• Replace or Tighten the Belts: Any belt that has worn out or is loose should be replaced to ensure that the auger and impeller work as expected.

5. Improper Engine Speed

If the engine is running at a low rpm or at a high rpm, it will affect the throwing of the snow. It is also important to note that an engine that is not running at the right speed will cause the snow throwing to be inconsistent.

How to Fix:

• Check Engine Speed: The engine should be running at the right speed. Check your owner’s manual to ensure that it is running at the recommended RPM for snow throwing.

6. Frozen Fuel or Carburetor Issues

In cold climates, the fuel may freeze and there may be some issues with the carburetor, which affects the performance of the engine. This can lead to the snow blower not throwing the snow as it is supposed to do so.

How to Fix:

• Change the Fuel: It is advisable to use fresh and clean fuel in your snow blower and drain the fuel tank and replace it with fuel stabilizer during the off season to avoid freezing.

• Check the Carburetor: If the carburetor is dirty, it will hinder the performance of the engine. Check and clean or replace the carburetor if necessary to allow proper flow of fuel.

Snow with your snow blower is very important especially during the winter season and this requires the following. Some of the common problems that you should check and rectify include worn paddles, clogged chutes, and loose belts among others in order to keep your snow blower in good working condition. For further useful information and tips please visit our articles – your snow blower’s maximum performance is only one repair away!

Written by Allen Rode for WholeToolbox , your trusted source for a variety of top-quality power tool and lawn mower parts, including Snow Blower Fix, and lawnmower batteries